Fireplace Heater DF-HT5390P (32″)

  • Fireplace Heater DF-HT5390P (32″)
  • Fireplace Heater DF-HT5390P (32″)
  • Fireplace Heater DF-HT5390P (32″)

Fireplace Heater DF-HT5390P (32″)


  • Wattage (220V-240V~)/W: 1300/2000
  • Power cord visible length (m): 1.6
  • Product size (mm): 830*260*260
  • Gift box size (mm): 870*222*280
  • Carton box size (mm): 885*464*298
  • Units/ctn: 2
  • N.W.&G.W/ctn: 7.8/11
  • 1*20’GP/1*40’GP/1*40’HQ(pcs): 446/950/1090
  • Product Detail

    Specification

    Video

    Product Tags

    *Innovative fan heater Heat PTC 2000 flame
    Feel-good warmth with real-looking log fire

    The modern tower heater Heat PTC 2000 flame from SUNTEC is equipped with a ceramic heating element (PTC ** resistors), which immediately converts the electricity into 100% thermal energy. A highly efficient heat output is created. Another advantage is the low-noise operation, since, unlike fan heaters without a PTC heating element, only very little wind is generated. The big highlight is the electric fireplace, which creates a real fireplace atmosphere.

    *Feel-good warmth with fireplace simulation
    After a very short heating-up time, the modern tower heater reaches the selected heating output (level 1 = 1300 W, level 2 = 2000 W). The highlight is the real-looking log fire with decorative pieces of wood. The function can either be switched on or off. Thanks to the quiet DC motor, operation is very quiet. Thanks to the space-saving design, the light weight and the practical carrying handle, the PTC heater can be easily transported and set up anywhere. You can enjoy a cozy fireplace atmosphere without soot and dust.

    *Individual temperature setting
    Control is via the LED touch display or the supplied remote control (excl. 1x CR2032). You can choose between 2 heating levels. The temperature can be set between 15 and 35 ° C via the thermostat, which is automatically maintained. In the energy-saving ECO mode, the target temperature is set to 22 ° C and the heating level is automatically adjusted depending on the room temperature. In addition, the heater has a practical switch-off timer that can be programmed between 0 and 24 hours.

    *Effective heat distribution
    Due to the oscillation of 80 degrees, the warm air is evenly distributed in the room and thus quickly ensures a comfortable temperature. An integrated dust filter prevents unnecessary dust. If necessary, the filter can be easily removed and washed or replaced. The overturn protection and double overheating protection ensure the necessary safety. After the device has been switched off, a 10-second countdown is shown on the display while the built-in DC fan continues to cool down.

    *Highlights
    PTC tower heater for rooms up to 60 m³ (~ 25 m²)
    Ideal for living room, office, conservatory, garage
    Fast + sustainable warmth thanks to ceramic stones
    With electric chimney fire (optionally switchable)
    2 heating levels (1300/2000 W) + ECO mode with temperature monitoring (Auto On / Off)
    Temperature selection from 15-35 ° C + timer (0-24 hours)
    Oscillation (can be switched on / off) + dust filter
    LED display + remote control (excl. 1x CR2032)

    *Function
    Fireplace heater with power 1300/2000W
    Touch control
    Digital temperature control from 15°C to 35°C
    24h Timer, Remote;
    Simulation Fire, separately control
    With tip-over switch
    With double over-heating protection
    With easy-carry handle
    With LED display
    With Swing function
    With ECO function


  • Previous:
  • Next:

  • Wattage (220V-240V~)/W 1300/2000
    Power cord visible length (m) 1.6
    Product size (mm) 830*260*260
    Gift box size (mm) 870*222*280
    Carton box size (mm) 885*464*298
    Units/ctn 2
    N.W.&G.W/ctn 7.8/11
    1*20’GP/1*40’GP/1*40’HQ (pcs) 446/950/1090

    Write your message here and send it to us

    Related Suggestion

    More